How to Repair Your Own Samsung Side-By-Side Fridge Freezer
These statistics apply in particular to the Samsung RS21 range of Fridge Freezers. These are the most popular Samsung variety of Side-through-Side refrigerator-freezers currently used in the UK.
The RS21 range of models has a not unusual fault symptom affecting the fridge segment handiest. If you find the refrigerator getting too hot, like many different owners of this version, follow these simple guidelines, and within seconds, you may know the purpose of this fault.
Related Contents :
- There is no Freedom Tower in New York, no tourists at the Taj Mahal
- 12 of the best analog saturation plugins
- Tracking the Rise of ‘Clean’ Beauty
- 6 of the Best Markdown Plugins for WordPress
- How to Make Your 4K Footage Look Like It Was Shot in the 90s
All fashions of Samsung Fridge Freezers, including the RS21 range, have a smart self-diagnosis facility constructed into every equipment module. This self-analysis facility is easily accessed using the control panel on the front of the freezer door. This panel includes four buttons and two separate virtual temperature displays (one displaying the temperature of the freezer compartment and the other showing the temperature of the refrigerator compartment).
Press the two pinnacle buttons of the control panel, protecting them each down collectively for 8 seconds. After eight seconds, you will notice an everyday ‘pinging’ sound. Hold the two buttons for one extra second, then release each button.
Look carefully at the digital fridge temperature display (the right-hand pair of numbers) immediately under the two pressed buttons. If there’s a fault with the refrigerator section, you may see that one of the lines (that would normally make up the variety at the display) is flashing. For instance, if the lowest horizontal one is flashing, it’s miles, indicating that the refrigerator fan motor has failed.
The fault cited above is probably the most common one, and the mark may be without problems and appropriately repaired yourself without the want of an engineer. Spare parts for these Samsung fashions are to be had at reasonable costs. If you discover that an extraordinary line is flashing on the digital temperature display, it will mean that there’s a unique reason for the fault. This self-analysis facility is easily accessed using the control panel on the front of the freezer door. This panel includes four buttons and two separate virtual temperature displays (one displaying the temperature of the freezer compartment and the other showing the temperature of the refrigerator compartment).
If, as an alternative, the freezer is faulty, one of the lines of the virtual temperature show for the freezer (the left-hand pair of numbers) can be flashing. Again, every specific freezer digital temperature display line represents a distinctive freezer fault.
Please be aware that the self-diagnosis records discussed above might be deleted whenever the refrigerator freezer has been unplugged from the electrical power supply. Don’t fear; plug it in again and wait for the fault to show itself again. This typically happens within about twelve hours.
Please look at it; after a short time (approximately thirty seconds), the manipulate panel will robotically pop out of this self-analysis mode and return to the regular operation mode.
